Toggle Nav
Currency
100 kVA 208 Volt to 120/240 Volt Single phase Isolation Transformer SA100B-K/Z3
Availability: NOT in stock. Current lead time to manufacture: 5-6 weeks
SKU
SA100B-K/Z3
CA$8,068.00
Catalog No.: SA100B-K/Z3
Isolation Transformer 100 kVA • Single Phase • Primary: 208 Volt • Secondary: 120/240 Volt
Conductor: Aluminum. • Frequency 60 Hz.
Isolation Transformer 100 kVA • Single Phase • Primary: 208 Volt • Secondary: 120/240 Volt
Conductor: Aluminum. • Frequency 60 Hz.
Single phase Isolation Transformer SA100B-K/Z3 has primary and secondary windings that are physically separated from each other. It allows AC power to be taken from one device and fed into another without electrically connecting the two circuits. The transformer blocks transmission of DC currents from one circuit to the other, but allow AC signals to pass, and also blocks interference caused by ground loops.
Preliminary General Drawing. (Dimension, inch).
*All information and images presented here is based on preliminary data or design and may be changed without prior notice.
Request Drawing Proof to confirm dimensions from Optional Feature tab, if it is critical.
Isolation Transformer SA100B-K/Z3 Winding Schematics:
| Product Type | Isolation Transformer |
|---|---|
| Phase | Single |
| Power Rating | 100 kVA |
| Frequency, Hz | 60 |
| Vector Group | II |
| Primary voltage | 208 Volt |
| Primary Max Current, Amps | 480.8A |
| Primary Terminals | H1-H2 |
| Primary Voltage Taps | 0%; ±2.5%; ±5.0% |
| Secondary Voltage | 120/240 Volt |
| Secondary Max Current, Amps | 833.3A at 120 Volt or 416.7A at 240 Volt |
| Secondary Terminals | X1-X4, Interconnect for Lower Voltage: X1 to X3 and X2 to X4, or for Higher Voltage: X2 to X3 |
| Winding Conductor | Aluminum |
| Temperature Rise, °C | 150 |
| Insulation Class | 220 (R) |
| Insulation Level, (B.I.L), kVA | 10 |
| Efficiency at 35% Load, % | 98.90 |
| ANSI/IEEE Impedance, % | 4.0-5.0 |
| Sound Level, dB | 55 |
| Standards, Certifications, Compliances: | Efficiency compliance: CANADA: SOR/DORS/2018-201 (NRCan 2019). CSA: CSA C802.2-18., USA: DOE 10 CFR PART 431:2016-01 (DOE 2016)., CSA Standard C22.2. No.47 Air Cooled Transformers (Dry Type)., CSA certified. File No. LR34493,, Seismic Qualified SDS=1.60g 2/h=1.0 OSHPD OSP-0109-10 for USA zone 4 and Canada zone 6.,, UL Listed. File No.E108255., ISO9001 Quality Certification. |
| Enclosure Type | Nema 3R. Outdoor ventilated Weather resistant steel enclosure (IP14). FINISH - Polyester powder coat. |
