2 Amps 208-240 Volt Three phase Line Reactor 3PR-0002C3L

Availability: NOT in stock. Current lead time to manufacture: 2-3 weeks
SKU
3PR-0002C3L
CA$232.00
Add to Compare
Catalog No.: 3PR-0002C3L
Line Reactor Current: 2 Amps • Voltage: 208-240 Volt • Three Phase
Conductor: Aluminum. • Frequency 60 Hz.

Three phase Line Reactor 3PR-0002C3L has primary and secondary windings that are physically separated from each other. It allows AC power to be taken from one device and fed into another without electrically connecting the two circuits. The transformer blocks transmission of DC currents from one circuit to the other, but allow AC signals to pass, and also blocks interference caused by ground loops. Secondary neutral to ground bonding eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment.

 Line Reactor general dimensions

Preliminary General Drawing. (Dimension, inch).

*All information and images presented here is based on preliminary data or design and may be changed without prior notice.
Request Drawing Proof to confirm dimensions from Optional Feature tab, if it is critical.

Line Reactor 3PR-0002C3L Winding Schematics:

 

Delta-Wye(DYn) Three phase connection

More Information
Product Type Line Reactor
Phase Three
Maximum Current 2 Amps
Voltage range 208-240 Volt
Frequency, Hz 60
Impedance 3%
Current over load capability 150% for 1 min
Saturation Level 250% of rated current (50% rated inductance minimum at 350% rated current).
Vector Group Delta-Wye(DYn)
Winding Conductor Aluminum
Temperature Rise, °C 150
Insulation Class 220 (R)
Insulation Level, (B.I.L), kVA 10
Sound Level, dB 40
Standards, Certifications, Compliances: Efficiency compliance: CANADA: SOR/DORS/2018-201 (NRCan 2019). CSA: CSA C802.2-18.,
USA: DOE 10 CFR PART 431:2016-01 (DOE 2016)., Meets NEMA ST-20, IEEE C57.12.01., IEEE C57.12.91, Seismic Qualified SDS=1.60g 2/h=1.0 OSHPD OSP-0109-10.,, cUL Listed.
Enclosure Type Nema 3R. Outdoor ventilated Weather resistant steel enclosure (IP14). FINISH - Polyester powder coat.