75 kVA 416 Volt to 120/240 Volt Single phase Epoxy Encapsulated Transformer SC75G-K/EP

Availability: NOT in stock. Current lead time to manufacture: 5-6 weeks
SKU
SC75G-K/EP
CA$18,063.00
Add to Compare
Catalog No.: SC75G-K/EP
Epoxy Encapsulated Transformer 75 kVA • Single Phase • Primary: 416 Volt • Secondary: 120/240 Volt
Conductor: Copper. • Frequency 60 Hz.

Single phase Epoxy Encapsulated Transformer SC75G-K/EP is an isolation transformer with primary and secondary windings that are physically separated from each other. It allows AC power to be taken from one device and fed into another without electrically connecting the two circuits. The transformer blocks transmission of DC currents but allow AC signals to pass. It is sealed in silica sand and resin solid mass, completely enclosing and protecting the core and coil, while significantly reducing audible noise and suitable for hazardous environments.

 Epoxy Encapsulated Transformer general dimensions

Preliminary General Drawing. (Dimension, inch).

*All information and images presented here is based on preliminary data or design and may be changed without prior notice.
Request Drawing Proof to confirm dimensions from Optional Feature tab, if it is critical.

Epoxy Encapsulated Transformer SC75G-K/EP Winding Schematics:

 

II Single phase connection

More Information
Product Type Epoxy Encapsulated Transformer
Phase Single
Power Rating 75 kVA
Frequency, Hz 60
Vector Group II
Primary voltage 416 Volt
Primary Max Current, Amps 180.3A
Primary Terminals H1-H2
Primary Terminal Lugs 6-300MCM
Primary Voltage Taps 0%; ±2.5%; ±5.0%
Secondary Voltage 120/240 Volt
Secondary Max Current, Amps 625.0A at 120 Volt or 312.5A at 240 Volt
Secondary Terminals X1-X4, Interconnect for Lower Voltage: X1 to X3 and X2 to X4, or for Higher Voltage: X2 to X3
Secondary Terminal Lugs 2-600MCM
Winding Conductor Copper
Temperature Rise, °C 130
Insulation Class 200 (N)
Insulation Level, (B.I.L), kVA 10
Efficiency at 35% Load, % 92.96
ANSI/IEEE Impedance, % 2.0-3.0
Sound Level, dB 45
Standards, Certifications, Compliances: CSA Standard C22.2. No.47 Air Cooled Transformers (Dry Type)., CSA certified. File No. LR34493,, Seismic Qualified SDS=1.60g 2/h=1.0 OSHPD OSP-0109-10 for USA zone 4 and Canada zone 6.,, UL Listed. File No.E108255., Meets NEMA ST-20, ISO9001 Quality Certification.
Enclosure Type Nema 3R. Outdoor Non-Ventilated Weather resistant steel enclosure (IP54)